群辉NAS 使用第三方硬盘 - 丿记性不太好丶

Setting up a new 2025 or later plus model with only unverified HDDs
Credit to Alex_of_Chaos on reddit

DSM won't install on a 2025 or later series plus model if you only have unverified HDDs. But we can get around that.

Start telnet by entering http://<NAS-IP>:5000/webman/start_telnet.cgi into your browser's address bar.
Replace <NAS-IP> with the IP address of the Synology NAS.
Open a telnet client (powershell, PuTTY etc) on your computer and connect to the Synology with 'telnet `.
Replace <NAS-IP> with the IP address of the Synology NAS.
Log into telnet with:
root for the login
101-0101 for the password
Execute the following command: (using a while loop in case DSM is running in a VM)
while true; do touch /tmp/installable_check_pass; sleep 1; done
Refresh the web installation page and install DSM.
Then in the telnet window, or via SSH, execute the following command:
/usr/syno/bin/synosetkeyvalue /etc.defaults/synoinfo.conf support_disk_compatibility no
If Storage Manager is already open close then open it, or refresh the web page. If refreshing the page or restarting Storage Manager is not working, try restarting your Synology NAS.
You can now create your storage pool from Storage Manager.

硬盘兼容列表修改: 在群晖控制面板找到终端命令勾选SSH,使用连接工具或Windows操作 ssh登录到群晖
1、windows运行cmd
2、输入：ssh管理员账号@群晖IP地址（ssh p@10.168.4.16）回车
3、sudo -i
4、输入vi /etc.defaults/synoinfo.conf
5、按i进入编辑模式
6、找到support_disk_compatibility="yes" // =>把yes改成no 就是关闭硬盘验证
7、重启群晖：reboot